Operation
1) The kayak should be carried into position. Dragging or sliding the product over
ground can cause permanent damage.
2) Be aware of your fin, and check the connection with Quick Release pin before each
use.
For whitewater use remove the fin, store the Quick Release pin in the
empty finbox hole.
3) This model is designed for easy reboarding from the water. The kayak may be
boarded from the side, or from the rear of the boat using the handles provided.
4) Know the waterways. Be aware of physical dangers including, but not limited to
submerged obstacles, strong winds and/or currents, challenging water conditions, the
potential for hypothermia, changes in weather, wildlife and other boaters.
5) Do not exceed the product’s recommended number of users or capacity for your
particular kayak.
6) If the product shows any signs of instability or appears to have lost air pressure,
discontinue use. Check air pressure and air-holding ability. Do not continue use until
these are confirmed. See Repair Instructions in this Owner’s Manual.
7) If you are using this product for extended trips you should bleed air pressure from
the high-pressure intake valves after use. Reinflate to appropriate air pressure prior to
next use.
Care & Maintenance
1) If using the kayak in salt water or unclear fresh water it is best to rinse the kayak
thoroughly with clear, fresh water after use.
2) If necessary, occasional cleaning can be done with mild liquid soap and fresh water.
Rinse well. Harsh chemical cleaners may damage the product.
3) Always allow your kayak adequate time to dry completely before storage. The kayak
will dry best while inflated.
4) After each use, bleed air pressure from high-pressure spring valves by pressing the
spring down.
5) Long-term exposure to sunlight will damage the product. Regularly apply a UV
protectant such as 303 UV Protectant, available at many watersports dealers, or online
at www.303-products.com.
NOTE: Rogue™ kayaks should use UV Protectant for
polyester FABRIC.
6) WARNING: Use of a high-pressure washer will damage the product and void the
warranty.
Storage
1) It is acceptable to store your kayak inflated if you wish. Check air pressure before
using.
2) Always allow your kayak adequate time to dry completely before storage. The kayak
will dry best while inflated.
3) For long term storage, remove all air. Fold sides inward. Start at the front, roll or fold
toward the back. Allow trapped air to escape by opening valves.
4) Store out of direct sunlight, protected from the environment in a clean, dry location.
NEVER store uncovered, in a damp location, or on a concrete surface. NEVER store at
temperatures below 40
o
F (4
o
C).
www.AquaglideKAYAK.com
Figure 3a:
Fin Installation
Figure 3b:
Fin Installation
Quick Release Pin
Содержание ROGUE XP SERIES
Страница 2: ...www AquaglideKAYAK com...
