Aquaglide CHELAN 155, Руководство пользователя

Страница: 8 / 28

www.aquaglide.com 8
Chelan 155 is a 1-person or tandem inflatable kayak for use in sheltered inshore coastal or inland
waterways. Total capacity is 3 people to accommodate a child or pet.
Competence: The operation of any vessel is a serious responsibility. Each operator must be competent
to control the kayak including ensuring the safety of his/ her vessel and its crew. If this is your first vessel,
or if you are unfamiliar with the craft, consider the risks and make certain you have enough experience
to handle and operate this product in the intended conditions. Your dealer, local experts, and clubs can
all be useful sources of information regarding local conditions, training and/or competent use of this
product.
Capacity: Both shape and weight affect the stability of your kayak. Shape is determined by the
manufacturer and cannot be changed. Added weight of equipment and crew is controlled by the user
and must always be less than the maximum weight capacity stated in this manual and in cockpit.
Trim:
Placement of added weight can influence performance of the craft and may adversely affect
stability of the vessel. Place heavy objects as close as possible to the centerline of the craft. Do not
concentrate more than 300lb (136kg) in any one area during use. Added weight of equipment and crew
should be positioned such that the kayak remains level in the water, both fore & aft, and side to side. In
two-person kayaks, it is typical for the heavier paddler to sit in the rear.
Maintain Working Pressure: Air pressure is temperature dependent. Always confirm proper working
pressure before use. Be aware that changing temperatures can cause critical over or under-inflation.
Leaving the product in the sun may quickly affect the internal pressure causing permanent damage. If you
must leave the product, find a shady area, release some air, and leave product upside down to minimize
thermal over-inflation. If product shows signs of instability or pressure loss, discontinue use until product
is returned to working pressure and/or repairs made.
Paddling - First Steps:
1. Place product in the water in an area protected from wind and boat traffic. Boarding conditions will
vary by site but if uncertain, board in shallow water with solid footing and a stable handhold to make
entry easier. If a solid handhold is not available, brace paddle across cockpit in front of user while
boarding and sitting. Always step into the center of the boat and stay low to avoid tipping.
OPERATION
d. Fin has a horizontal pin toward the rear. Starting with this pin, insert fin into opening in finbox
and slide backward until front of fin can be pressed into box. See Step 2.
e. Align hole in fin with hole in flat tab and insert thumb screw. Tighten to secure. See Step 3.
f. Reverse steps to remove fin.
10. To launch kayak, lift product completely and place in water. This may require more than one person.
Never drag product as damage may occur.
H