Aquaglide 12-14 Slide (small), Руководство пользователя

Страница: 7 / 28

www.aquaglide.com 7
1. Locate a flat, dry area with access to outlet for electrical pump. The best setup position
will also make launching easy. Never drag product as damage may occur.
2. Unfold product completely and locate Main Valve [1]. To help future storage, closely note
original folding & packaging method. Remove valve cap and confirm valve is in inflate (1-way
airflow) position (see HR Valve Operation Graphic).
3. Insert air pump hose with proper valve fitting into Main Valve [1], lock into place. Use
pump to inflate Main Valve [1] to Working Pressure as shown in
Chart 1 . Check for proper
pressure using gauge (manometer). Replace valve cap.
4. Product can only be used while properly connected to an anchored AG bouncer or
trampoline. Confirm that suitable anchor(s) and mooring lines are in place and bouncer or
trampoline is properly anchored before using this item.
5. To launch product, lift completely and place in water. Never drag product as damage may
occur.
6. Small Slide has unique attachment straps designed only for attachment to AG bouncers
and trampolines. Small Slide (12 – 14) fits Ricochet 12.0 and Recoil 14.0 only. Large Slide
(16 – 17) fits Ricochet 16.0 and Recoil 17.0 only. Slide sizes are not interchangeable. Attach
slide while fully inflated. Make sure connection is tight and there is NO GAP between items.
Failure to connect items properly may result in injury or death. See D-1 through D-3.
a. Place slide in position over 4 dedicated slide rings on bouncer or trampoline. Foot of slide
should rest easily on the water.
b. Lead slide webbing straps outward through connecting rings on top side of bouncer or
trampoline. Lead webbing through ladderlock buckle and cinch all 4 straps firmly.
c. For extra security, lock tail of webbing strap back through upper part of buckle.
D-1 D-2 D-3