XE
USA
10
H
ousinG
r
e
-a
ttacHment
& p
ivot
Pivot Locking System
After securing the hanging unit
, a
pivot adjustment
can be made to direct the fogging output to a
desired location.
This unit has a positive pivot locking system with
four available positions.
~
5º up
~
Horizional
~
7º down
~
14º down
To Make an Adjustment
Balance the weight of the unit and lift one pivot
lock up and rest it in the middle of the "M"
. While
supporting the unit lift the second lock up.
Adjust unit to desired angle. Re-engage both locks
into the closest available slot.
NOTE:
Use both legs of the "M" to get availability of
all four pivot angles.
Pivot
Joint
Pivot
Lock
Attaching Housing
Locate the six cap screws set aside
during preparation. (Refer to
Fig. 1
)
Reposition the housing over the
venturi starting with the lower
half of the housing.
Tilt housing
downward to clear the lower lip of
the venturi. Raise the rear edge of
the housing between the venturi
and rear guard.
(See
Fig. 7
)
Using the 5/32" allen wrench
(provided) secure housing to the
rear guard.
Fig. 7
1/4-20 x 3/8"
button head
cap screw
(#54)
Housing
Assembly
Venturi
◄
AQUA
FOG
