Aquafilter Clear Choice, Руководство по установке

Страница: 7 / 36

11. Connection to the running water installation - the option of the wall mounted
water source distribution device
WARNING! The manufacturer does not encumber any responsibility for any mechanical damages created as the result of assembly or
exploitation errors, as well as for the exploitation of the system in a manner contrary to its designed use. The system is to be installed
O
inside interiors, the ambient temperature of which surpasses 2 C.
WARNING! Prior the initiation of the process of system assembly, make sure to take off the elements indispensable for the assembly.
Detach the water source distribution device from the wall. Close the shutt-off valve located upon the cold water supply pipe.
1 2
Upon the thread of the ball valve SEWBV1414 apply a few layers
of Teflon tape.
Assemble the FT07 connecting section upon the cold water
distribution pipe ensuring the position which will facilitate the
easy screwing of the
SEWBV1414 valve and will facilitate its
unrestrained opening and closing.
WARNING! Make sure to remember about the fitting of
gaskets within the adequate connecting section locations.
4 3
5
6
Screw the SEWBV1414 valve onto the FT07 connecting section.
Slide the nut upon the tubing and then connect it to the
SEWBV1414 valve by pushing it until it stops and by fastening the
nut.
Screw the FT02 connecting section onto the hot water supply
valve. WARNING! Make sure to remember about the
placement of seals/gaskets within the adequate location of
connecting sections.
Place back the water supply distribution device and fit it with the
assembled connecting sections.
8 7
6