AquaCraft Rio 51Z Скачать руководство пользователя страница 2

2

REQUIRED ITEMS

THE FOLLOWING TOOLS ARE REQUIRED (NOT INCLUDED) TO 
ASSEMBLE AND INSTALL THE BATTERIES IN YOUR RIO 51Z

 5.5mm Nut Driver (HCAR1112)

 7mm Nut Driver (HCAR1116)

 3mm Hex Driver (HCAR1156)

 #2 Phillips Screwdriver (HCAR1024)

 #2 Slotted Screwdriver (HCAR1002)

 10mm Wrench

NECESSARY COMPONENTS FOR OPERATING YOUR RIO 51Z

  Personal retrieval system.

  Friend to help you start and launch the boat. Besides, R/C boating 

is the most fun when you have a friend with you.

 8 “AA” batteries

  Approved gasoline can (with standard pump gas)

 2-cycle oil

 Graduated mixing cups (GPMR8056)

 Small funnel

 GrimRacer

 50 weight cable oil (AQUB9550)

 GrimRacer Speed Grease drive cable lubricant (AQUB9500)

EXTRA SUPPLIES YOU MIGHT WANT TO HAVE WITH YOU DURING 
THE OPERATION OF YOUR RIO 51Z

As with any hobby, it is a good idea to assemble a useful collection 
of tools and accessories to bring along when you head out to the 
pond. Here are some items you will want to keep handy:

 Extra “AA” Batteries 

 RX Balloons (AQUB9504)

❏ 

Threadlocking Compound (GPMR6060)

 Pliers (HCAR0625)

 Hobby Knife (HCAR0109)

 Metric hex wrench set (HCAR0521)

 Stubby Metric hex wrench set 

 5/8 [16mm] inch spark plug wrench

OTHER USEFUL ITEMS TO HAVE ON HAND:

 Waders or rubber boots

 Paper Towels

 Spray-On Cleaner

 Sunglasses

 Sunblock

 Folding table 

 Lawn chairs

 First-Aid kit

 Cooler with plenty of ice and soda

 Canopy or shelter

THANK YOU!

Thank you for purchasing the Rio 51Z! We at AquaCraft know how 
exciting a new R/C boat purchase can be and we know you’re anxious 
to get started. Please take time fi rst to read this manual carefully and 
completely before attempting to operate your model. This manual 
contains the instructions you need to safely operate and maintain 
your boat. Remember as with any hobby, there is a possibility of 
injury if this product is misused, so please be careful.

If for any reason you think that this model is not for you, return it to 
your local dealer immediately. PLEASE NOTE: Your hobby dealer 
cannot accept a return on any model after the fi nal assembly 
sequence has begun.

MANUAL SPECIFICATION & DESCRIPTION CHANGES

All pictures, descriptions, and specifi cations found in this instruction 
manual are subject to change without notice. AquaCraft

 and Zenoah

 

maintain no responsibility for inadvertent errors in this manual.

SAFETY PRECAUTIONS

•  Never ever attempt to swim after a stalled R/C boat. Do not get 

in the water for any reason to retrieve your boat. To aid you in 
retrieving a stalled R/C boat, set up a fi shing reel with a tennis 
ball tied to the end of the line. Or better yet, get yourself a small 
Jon boat so you can row out and pick up your boat. Remember 
to use a PFD (personal fl otation device) any time you enter your 
retrieval craft.

•  

AquaCraft products are to be used by ages 14 and over. 

•  

Do not touch the propeller anytime the engine is running. Pay 
equally close attention to items such as loose clothing, shirtsleeves, 
ties, scarves, long hair or anything that may become entangled in 
the spinning prop. If your fi ngers, hands, etc. come in contact with 
the spinning propeller, you may be severely injured.

•  

The speed and mass of this boat can infl ict property damage and 
severe personal injury if a collision occurs. Never run this boat 
in the presence of swimmers or where the possibility of collision 
with people or property exists.

•  

Model engines generate considerable heat. Do not touch any part 
of your engine until it has cooled. Touching the muffl er, cylinder 
head, or exhaust header may result in a serious burn.

•  

This boat is controlled by radio signals, which are susceptible to 
possible interference from other R/C transmitters, paging systems, 
or other electrical noise. Before turning your radio transmitter and 
receiver on, make sure no one else in the area is operating a radio 
on the same frequency (channel).

•  

Gasoline is poisonous. Do not allow it to come into contact with the eyes 
or mouth. Always store gasoline in an appropriate labeled container and 
out of the reach of children!

Содержание Rio 51Z

















Отзывы: