4
Understanding Your Transmitter
To help you better understand your transmitter and its functions,
here is a picture outlying the operation features.
1
Steering Wheel
2
LED Power Indicator
3
Power ON/OFF Switch
4
Throttle Trigger
5
Steering Rate Adjustment (this is used to increase or
decrease the turning radius of the boat)
6
Throttle Reversing Switch
7
Throttle Trim Dial
8
Steering Trim
9
Steering Reversing Switch
Assembly Sequence
INSTALLING THE TRANSMITTER BATTERIES
Install 4 “AA” batteries into the transmitter in the confi guration
molded into the battery fl oor.
Note:
Turn the transmitter “ON”. The battery level indicator
light (LED) should glow red. If the light is fl ashing the batteries
are low and need to be replaced.
INSTALLING THE BATTERY PACK
Remove the canopy by lifting at the back and rotating up off
the front pins.
In your boat, you will fi nd a length of hook and loop material
on the battery tray. Remove the piece of hook and loop and
install on to the battery’s back. Install the battery into the boat
as shown.
