4
Understanding Your Transmitter
To help you better understand your transmitter and its functions,
here is a picture outlying the operation features.
1
Steering Wheel
2
LED Power Indicator
3
Power ON/OFF Button
4
Throttle Trigger
5
Steering Rate Adjustment
(this is used to increase
or decrease the turning radius of the boat)
6
Throttle Reversing Switch
(“R” is the position
the switch needs to be in for your GP-1 Ultra Mini
Hydroplane)
7
Throttle Trim Dial
(this should be in the12:00 to 3:00
o’clock position for your GP-1 Ultra Mini Hydroplane)
8
Steering Trim
(this is used to adjust the tracking of
the boat)
9
Steering Reversing Switch
(this should be in the “R”
position to operate your GP-1 Ultra Mini Hydroplane)
Assembly Sequence
INSTALLING THE TRANSMITTER BATTERIES
Slide off the battery door from the bottom of the transmitter.
Install 4“AA” batteries into the transmitter in the confi guration
molded into the battery fl oor and reinstall the battery door.
Turn the transmitter on by pressing the “Power” button on the
right side of the transmitter. The battery indicator light (LED)
should glow red. If the light is fl ashing, the batteries are low
and need to be replaced.
INSTALLING THE BATTERY PACK
Remove the canopy by lifting at the back and rotating up off
the front pins.
AQUB1820 GP-1 Mini.indd 4
AQUB1820 GP-1 Mini.indd 4
5/22/2013 1:22:49 PM
5/22/2013 1:22:49 PM
