Aquacal TropiCal T170, Руководство по эксплуатации

Страница: 14 / 73

Page - 10
3
ENTER TO STOP MENU TO EXIT, PRESS
& HOLD TO STATUS
1.8 Programming
IN THIS SECTION:
1.8.a Setting Date and Time 10
1.8.b Setting Date and Time Format 11
1.8.c Selecting Celsius or Fahrenheit 12
1.8.d Setting Entry Code Option 13
1.8.e Disabling Entry Code Option 14
1.8.f Configuring Groups 15
f.1 Create a Group 15
f.2 Edit a Group 17
f.3 Delete a Group 18
1.8.g Configuring Schedules 18
g.1 Create a Schedule 19
g.2 Edit a Schedule 20
g.3 Delete a Schedule 21
1.8.h Schedule and Program Modes 23
1.8.a Setting Date and Time
The date and time are required in order to allow schedules to operate properly.
Set the heat pump's date and time using the following steps.
PLEASE NOTE:
If a PoolSync
®
device is attached and in-use, the time and date will automatically be set and
maintained.
Enter "System" menus, then proceed
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
A
PRESS MENU
BUTTON
B
USE ARROWS TO
"SYSTEM"
C
PRESS "ENTER"
1
USE ARROWS TO MENU
"TIME / DATE"
2
PRESS ENTER, ITEM TO
CHANGE WILL BLINK
1
-
O
pe
ra
ti
on