*See ‘How
To’ section
for pool
coverage and
cable tangling
solutions.
QUICK START
Straighten out the floating cable. Then lift the flap
on the power supply. Plug in the cable.
Use only as much cable as you need to reach
the furthest wall.
This will help prevent cable tangling.
Turn power supply ON
Place the cleaner in your pool in the shallow end and turn
upside down to remove any air bubbles. Let the cleaner
fall to the bottom of the pool right side up.
Set the cleaning cycle and let the cleaner go!
Plug power supply into a GFCI outlet (Ground Fault Circuit Interrupter)
(Power Supply must be 12 ft. from the pool’s edge)
*Please see
Page 5 for
power supply
variations.
1
4
ON /
OFF
5
= 1 Hour Shut-off
= 2 Hour Shut-off
6
3
2