USER MANUAL FOR AC-2
6
POOL FILTER
6
OPERATION INSTRUCTION FOR DIGITAL CONTROL PANEL:
(Fig. 6- control panel)
Ⅰ
. Instructions for manual operation:
ON/OFF key:
Connect the power supply and press ON/OFF key, pump 1 and Ozone disinfection
system will go into working automatically.
O3 key (Ozone):
The ozone disinfection system will go into working together with pump 1 when
turning on the spa. Press “O3” key to turn off or turn on again the ozone disinfection system.
Key:
This key control the underwater light. First press key, the underwater light will be on,
and the color will change automatically; second press, the color will be fixed on a certain color; press
for the third time to shut it off.
+ / -
key:
Up / Down adjust key.
T/C key:
This key is to check the water temperature and set the clock time.
Short press the “T/C” key repeatedly, the control panel screen will display the current temperature
and standard time.
Set clock time:
Long press
“T/C” key for 3 seconds and loosen the hand, the panel screen will display
system clock time and hour/minute digit flashing, press
“+”“-”
to adjust the hour/minute. Press “T/C”
key again, the minute/hour digit will flashing, press
“+”“-”
to adjust the minute/hour. It will store and
return to the previous working status after flashing 5 seconds.
A/M key:
Long press “A/M” key to to switch the pump 1 between manual working mode (“A/M”
key has no light) and automatic working mode (“A/M” key shows red). It is also a set key for the
automatic operating periods setting for pump 1.
T1 / T2 / T3 key:
They are setting keys for the automatic operating periods setting for pump 1.
PUMP2 key:
In the manual mode, press “PUMP2” key to turn on or turn off the pump 2. In the
automatic mode, pump 2 will go to working together with pump 1. Press “PUMP2” key to turn off or
turn on the pump 2.
PUMP1 key
: This key controls the pump 1 on or off. It has two working modes, the manual mode
and automatic mode. In the manual mode, press “PUMP1” key to turn on or off the pump 1. In the
automatic mode, 3 operation periods can be set for pump 1. The pump 1 will only go to working
