Aqua Ultraviolet STATUARY 15 Watt 1/L, Инструкция по эксплуатации

Страница: 22 / 24

9. To reinstall the Quartz Sleeve, carefully insert the Quartz Sleeve into the end of the
Statuary Unit.
AQUA ULTRAVIOLET 42371 AVENIDA ALVARADO, TEMECULA, CA 92590 TEL: 951-296-3480 FAX: 951-296-3490
Cleaning or Changing the Quartz
19
10. Push the Rubber Seal into the UV until it touches the inner rim of the Threaded
Connector. The Rubber Seal should be 1/4” from the end of the Quartz Sleeve 1/2
of the Rubber Seal should be visible.
11. Screw on the Quartz Cap. Do not use a pipe wrench, pliers or any other tool on
this unit. Tighten by hand only.
12. Run Leak Test . Do not install Lamp or electrical components yet. After the
Quartz Sleeve has been installed, turn on pump and run it for five minutes to
check for leaks. If there are leaks see page 7 for solutions.
13. When there are no leaks install the lamp. Refer to steps 3 - 9 starting on page 8.
Quartz Sleeve
Frog O
peni
ng
Theaded C
annector