background image

For correct operation of this appliance, it is essential to
strictly observe these Installation and Operating Instructions.

1.

To maintain the ongoing high performance of your
Aqua-Pure Reverse Osmosis Water Purifier, regular
servicing will be required.  Full servicing details are
provided in the Maintenance Instructions.

2.

Installation must comply with any existing State or Local
Plumbing codes. Some Plumbing Codes require
installation of this Water Purification System be carried
out by a Licensed Plumber.

3.

This Reverse Osmosis Water Purifier requires a water
supply with a minimum pressure of 413kPa (60psi)  to
perform satisfactorily and a maximum pressure of
689kPa (100psi).  If the water supply pressure drops to
around 275kPa (40psi), the purifier will not deliver any
purified water.  If the water pressure applicable to this
installation is below 413kPa (60psi) consult your Aqua-
Pure Dealer.  

(For more details refer to Section 1 below:-

Installation Instructions).

4.

The APRO13212 is only for use on COLD water that is
microbiologically safe. This is water that has been
adequately chlorinated or disinfected for Bacteria
protection, either before or after the Purification System.

To use on microbiologically unsafe water, or water of
unknown quality, which has not been treated for
bacteria, viruses and other micro-organisms, additional
equipment will be required, such as a chlorine injection
system or ultra violet steriliser.

Before using any form of water treatment device on
microbiologically unsafe water or non-sterilised water,
a full laboratory test should be performed.

For further technical information or assistance, contact
your nearest Cuno Pacific Pty Ltd or Aqua-Pure sales
office.  These are listed in the Yellow Page phone books
or phone our Aqua-Pure Technical Assistance and
Product Support Help Line 

1300 367 362.

5.

This system has been supplied with our NEW,
revolutionary and versatile Aqua-Pure 98210 Multi
Function Control Valve as standard equipment.  This
valve must be installed as detailed in the Installation

Aqua-Pure is a market leader in water filtration. In
addition to our comprehensive range of Domestic
Water Purifiers, we design and manufacture an
extensive commercial and industrial range of
purification products and systems for the
Restaurant and Hospitality industry, Food and
Beverage Manufacturers and Bottled Water
Processors.

With over 80 years experience in designing and
manufacturing purification products and systems
for all industries and applications throughout the
world, we are confident the APRO13212 will excel
in providing the performance and personal
satisfaction you are expecting from your Reverse
Osmosis Water Purifier.

The APRO13212 has been designed to provide
Safe, Sparkling Clean and Fresh Tasting Water by
removing/reducing and providing protection from:

Parasitic Cysts - Cryptosporidium and Giardia,
Chemicals, Heavy Metals, Dissolved Salts,
Offensive Tastes and Odours, Sediment, Dirt,
Rust and other particulate contaminants.

Refer to the performance data sheet for complete
contaminant reduction details.

The APRO13212 Reverse Osmosis Water
Purification System has been supplied complete
with an assortment of plumbing fittings, which
should allow for easy installation on standard
undersink plumbing configurations.  Also included
is the Deluxe Long Reach, Lead Free, Chrome
Lever Actioned Faucet with variable flow control
and lock on position for ease of
use, which should be installed in your sink or
bench top.

Содержание APRO13212









Отзывы: