10
M
AINTENANCE CONT.
M
ONTHLY CONT.
Check that the Air Intake
Silencer and Air Intake Hose
don’t have any buildup of
minerals.
Rinse to flush out if required.
Parts may be soaked as
described for the
Venturi
Intake
on the previous page.
If you are using a
separate collection bottle,
flush out and inspect the
drain hose. Replace if
required.
Cleaning and
lubrication of o-rings
Rinse in fresh water
to remove any
particles attached.
Dry the o-ring.
Put a small amount
of lubricant* on and
smear it over the
o-ring so that it is
covered by a thin
film.
To remove the o-ring, use a plastic card,
such as a credit card to gently lever the
o-ring up and over
the lip of its seat.
Then roll it off the
part.
2 M
ONTHS OR AS
R
EQUIRED -
P
UMP
M
AINTENANCE
Remove the Collection Cup
Assembly, Water Level
Adjustment Knob, Air Intake
Silencer, Air Intake Hose
and Venturi Intake.
Turn the skimmer over and
carefully place it on a flat
surface. Take care not to let
it fall over.
Remove the Adjuster Gear
Lock Nut.
*Sold Separately
Take care not to lose small parts when
servicing the skimmer, especially when
cleaning components at a sink.
