background image

3

Important Safeguards

To guard against injury, basic safety 
precautions should be observed, including the 
following:

1. Read and follow all safety instructions and 
important notices in these instructions as well as 
on the product itself.

2. This appliance is not intended for use by 
children or infi rm persons without supervision. 
Young children should be supervised to ensure 
that they do not play with the appliance.

3. To avoid possible electric shocks, special care 
should be taken since water is employed in the use 
of aquarium equipment. For each of the following 
situations do not attempt repairs yourself. Return 
the appliance to an authorised service facility for 
service or discard the appliance.

a. If the appliance or any electrical component of 
the appliance (non-immersible equipment only) 
falls into the water or gets wet, do not reach for it. 
Unplug it and then retrieve it.

b. If the appliance shows any sign of abnormal 
water leakage, immediately unplug it from the 
power source.

c. Carefully examine the appliance after installation. 
It should not be plugged in if there is water on parts 
which are not intended to be wet.

d. Do not operate the appliance if it has a damaged 
cord or plug, or if it is malfunctioning, or dropped 
or damaged in any manner.

4. A “drip loop” (see graphic) should be arranged 
for each cable connecting an aquarium to a power 
supply. The drip loop is the part of the cable below 
the level of the power supply. It prevents water 
travelling down the cable and coming into contact 
with the power supply. If the plug or the socket does 
get wet, do not unplug the appliance. Disconnect 
the fuse or circuit breaker that supplies the power 
to the appliance, then unplug and examine for 
presence of water in the socket.

5. Always unplug the appliance from the electrical 
outlet when not in use, before putting on or taking 
off parts, before any type of maintenance or 
cleaning.

6. Never yank the cable to pull it from the socket. 
Pull the plug carefully to disconnect.

7. Do not use the appliance for reasons other than 
the intended use. The use of attachments that are 
not recommended or sold by the manufacturer 
may cause the product to be unsafe. This is not 
recommended.

8. Do not install or store the appliance where it 
will be exposed to weather or temperatures below 
freezing.

9. Make sure any component mounted on a tank 
is securely installed before operating it.

10. Ensure input voltage is the same voltage as 
your local power supply.

11. If an extension cable is used it should have the 
proper rating. Care should be taken to arrange the 
cord so that it will not be tripped or pulled.

12. A G.F.C.I (Ground fault circuit interrupter) & 
surge protector is recommended for all electrical 
appliances.

13. Ensure your hands are dry when turning the 
power switch on/off and when inserting/removing 
the power cable from the socket.

14. If you are in any doubt about the electrical 
installation or safety of this product you must 
consult a qualifi ed electrician.

For Guarantee Conditions, please refer to 
the Guarantee form that is enclosed with this 
product.

Содержание Aquience 1200











Отзывы: