4
Operation Manual ENG
Digital measuring and regulating unit to control a heating device
With the purchase of this digital measuring and regulating unit, you have selected a top quality product. It has
been specifically designed for aquaristic purposes. With this unit, you can continuously measure and control the
temperature of the water in your aquarium.
1.
Product Description
The Aqua Medic Temperature Controller HC is generally delivered with a salt-water resistant temperature sensor.
The unit is ready for connection. The heating device can be connected to the main plug.
2.
Heaters
Heaters of any type (i. e. glass or metal aquarium heaters, low voltage heating cables with transformer, warm
water supply by a magnetic valve) can be controlled with this Temperature Controller. The maximum output is
approx. 1,000 Watt.
3.
Description of the front panel
1.
Display
2.
Light „User On“
3.
Measurement adjustment switch
4.
Set-knob for adjustment
5.
Temperature sensor
6.
Power plug
4.
Installation
-
Connect to 220 V power source.
-
Set switch 3 to „T“ (display of temperature).
-
Place the temperature sensor into the aquarium and fix it with an Aqua Medic electrode holder. After a few
minutes, the actual temperature of aquarium water is indicated.