Aqua Lung pearl i3, Руководство пользователя

Страница: 13 / 32

2 Pearl i3 BC Owner’s Manual
Routing & Attaching the MP Inflator Hose
. After attaching the BC and regulator to a cylinder, make sure the blad-
der is completely deflated (see Deflation Methods, p. 22.)
2. Route the MP hose down
the back of the BC along the
cylinder and through the hook
& loop hold-down. If needed,
adjust the hook & loop hold-
down to the desired size.
3. Remove the dust cap on
the quick disconnect plug
on the i3 control unit.
4. Grab the hose grip between
your thumb and forefinger, then
slide the sleeve back.
NOTE: The dust cap can be stored in the small pocket below the control
unit. Be sure to keep the dust cap on while not in use.