Aqua Lung pearl i3, Руководство пользователя

Страница: 11 / 32

0 Pearl i3 BC Owner’s Manual
The Pearl i3 has two adjustments that allow you to customize the fit: the
position of the shoulder buckles and the length of the cummerbund. The
procedures for making these adjustments are outlined below. It is im-
portant to take into account the exposure suit you will be wearing when
making adjustments. For example, if you adjust the Pearl i3 to fit over a
T-shirt or bathing suit, it will be too small when you put it on while wearing
a 7mm wetsuit or a drysuit.
ADJUSTING THE FIT
Adjusting the Shoulder Buckle Position
For optimum comfort, the shoulder buckles can be raised or lowered. This
also allows you to extend or reduce the length of the shoulder straps.
. Remove the free end of the up-
per torso strap that is tucked away
between the bladder and shoulder
lobe ( Figure 1 ).
2. To lower the buckle, tilt the buck-
le inward and pull straight down
( Figure 2 ); to raise the buckle, hold
the buckle with one hand on pull on
the free end of strap ( Figure 3 ).
3. Repeat steps & 2 for the other
buckle.
4. After each adjustment, try the
BC on to make sure it fits properly.
5. Once the BC is properly adjust-
ed, tuck the free ends of the straps
between the bladder and shoulder
lobes.
Figure 1
Figure 2
Figure 3