Aqua Lung GLACIA, Руководство по обслуживанию и ремонту

Страница: 11 / 26

Glacia Second Stage Service & Repair Manual 9
© 2000 Aqua Lung America, Inc.
8. Apply a medium blade screwdriver to the slotted head of the adjustable crown (32), and turn the crown
clockwise to engage the threads. Continue turning the crown clockwise until it stops. Then turn the
crown out counterclockwise exactly 2¾ turns to arrive at its correct preliminary setting.
9. Insert the threaded end of the connecting rod (12) into the threaded side of the sheath (13) as shown in
Fig. 13a. Screw the connecting nut (11) into the sheath until fingertip tight (see Fig. 13b). Do not
tighten the connecting nut, as it will be removed later in the reassembly procedure.
Fig. 13 – Sheath Assembly
b.
Fig. 14 – Lever Assembly
a.
Flush
c. d.
10. a. Hold the lever retainer (15) with the rounded side facing upward. With the tip of the lever pointing
downward, insert the "feet" of the lever (14) into the lever retainer (see Fig. 14a). Lift up on the end of
the lever so it is pointing upward.
b. While keeping the lever in the up position, insert the threaded end of the connecting rod through the
squared hole in the front of the lever retainer (see Fig, 14b).
c. While keeping the sheath pressed against the lever retainer, drop the washer (21) over the threaded
end of the connecting rod (see Fig. 14c). Place a new locknut (20), rounded side first, into the nut-
driver. Screw the locknut onto the connecting rod until it is flush with the end of the connecting rod
(see Fig. 14d). Starting from the flush position, screw the locknut an addition two full turns (see Fig
14e).
e.
b.
a.
2 full
turns past
flush