Page: 2
The Aqua EZ Small Pool Vacuum System is a manual
pool vacuum system designed specifically for cleaning
soft sided above-ground pools with low flow filtration
systems.
Assembling
• Fully extend the telescopic pole by rotating the cam and sliding the
pole out, repeat this for both sections of pole.
• Next slide pole onto the body lining up the white clips to the holes
in the pole.
• Then attach hose by applying firm pressure slide hose cuff onto the
rear of the vacuum body.
• Finally align vacuum head with front vacuum inlet, sliding it towards
the body until it is seated firmly.
Connecting To Filtration System (Part 1)
For lower intake ports ( Return Fitting ) select your
intake connector from the five provided. Take a good
look at the fitting located low on the wall of your pool.
In some cases you may have to unscrew the protective
cap attached to the return. Once you have selected the
connector that matches, screw it onto the pool return
fitting.
If you have a pool with a wall skimmer, first remove
the skimmer lid. Then while holding the skimmer weir
out of the way, remove the skimmer basket and filter.
This will help increase suction to the vacuum. Next you
need to insert the vacuum plate that should have come
with your pool into the skimmer.
