2
ASSEMBLY INSTRUCTIONS
The lift arrives mostly assembled on a crate. Begin by locating all parts for your lift in the parts
lists below.
PARTS LIST
CRATE 1
1. PRO SPA 60 ASSEMBLY
ITEMS INCLUDED WITH PRO SPA 60 LIFT
1. (1) 24V BATTERY
2. (1) BATTERY CHARGER
3. (1) HAND CONTROLLER
4. (1) SEAT BELT
5. (1) HARDWARE BAG
TOOLS NEEDED:
9/16” Wrench (2)
3/4" Wrench
Drill
Hammer
Marker/Chalk
1 1/8" Masonry Bit
Epoxy or Hydraulic Cement
1.) Locate the 24v battery and wall mount battery charger. Batteries arrive from the factory
partially charged.
Charge the battery for 24 HOURS before initial use of the lift
.
Determine the location that you want to position the wall mount charger (next to a 110v
AC outlet), and fasten it with the supplied screws. Plug in the charger to the outlet.
2.) Clip the battery to the charger and allow the battery to charge. When the battery is
correctly mounted to the charger, the
CHARGE
light will illuminate. When the battery
is fully charged, the
CHARGE
light will
GO OFF.
3.) Go to the next section “PRO SPA 60 ASSEMBLY”.
HARDWARE BAG
ITEM # QTY.
DESCRIPTION
PART USE / LOCATION
1
3
4” DUAL THREADED ANCHOR
ANCHOR
2
3
1/2” x 1-1/2” HEX HEAD BOLT S.S.
STANDARD ANCHOR BOLT
3
3
1/2” FLAT WASHER S.S.
ANCHOR BOLTS
4
1
3/8” x 1-3/4” HEX BOLT, S.S.
CHAIR ACTUATOR
5
1
3/8” NYLOCK NUT
CHAIR ACTUATOR
Содержание PRO SPA 60
Страница 14: ...14 EXPLODED VIEW PRO SPA 60 ...