manualshive.com logo in svg

Aqua Creek PRO SPA 60, Руководство пользователя, Страница: 17 / 17

Поделиться
Скачать
Aqua Creek PRO SPA 60 Скачать руководство пользователя страница 17

17

Aqua Creek Products, LLC Limited Warranty:

Pro Spa Lift

™

60 - 24v Battery Powered

Aqua Creek Products, LLC (a.k.a. Aqua Creek) warrants to the original end user purchaser that products manufactured by Aqua
Creek, when properly installed in accordance with assembly and installation instructions, and properly used and maintained,
shall be free from defects in material and workmanship for a period of five (5) years from the date of original purchase, provided
that Aqua Creek receives prompt notice in writing of any defect or failure and satisfactory proof thereof, with the following
exceptions:

Exception : All electrical components, including the linear actuator shall have the following warranty period:

Year 1-2: 100% Coverage
Year 3: 60% Coverage (Customer is responsible for 40% of replacement cost)
Year 4: 50% Coverage (Customer is responsible for 50% of replacement cost)
Year 5: 40% Coverage (Customer is responsible for 60% of replacement cost)
All warranty calculations are from date of original purchase at manufacturer’s suggested retail price.
This warranty specifically excludes reimbursement for labor to remove, repair, or install the product and any freight charges.
This warranty does not cover any damages due to accident, misuse, abuse, negligence or failure to properly maintain any
products, or normal wear and tear from day to day operations. In the event that any products are altered, repaired, or improperly
installed by anyone without the prior written approval by Aqua Creek, all warranties are void. IMPORTANT: AMOUNT OF
WEIGHT PLACED ON LIFT SHALL NOT EXCEED THE RATED LIFTING CAPACITY OF 300 POUNDS FOR THE PRO
SPA 60 LIFT.

To initiate a warranty claim, the owner of an Aqua Creek product must provide the place of purchase, in writing, with a full
description of the product, its serial number, the dates of purchase and installation, and the exact nature of the defect. Within
thirty (30) days after receipt of a written warranty claim by Aqua Creek, and barring any unforeseen delays, the place of purchase
will be notified of Aqua Creek’s decision regarding the claim.

If requested by Aqua Creek, any defective product must be returned, freight prepaid, to Aqua Creek’s designated factory location
or duly appointed distributor for inspection and/or repair. Aqua Creek will, at its option, repair or replace the failed or defective
item, and deliver the repaired product or replacement to the seller of the product, freight prepaid to the destination provided for
in the original order. Products returned to Aqua Creek for which Aqua Creek provides replacement under this limited warranty
shall become the property of Aqua Creek.

A new warranty period shall NOT be established for the repaired or replaced products. Such products shall remain under
warranty only for the remainder of the original warranty period on the original products purchased.

This written limited warranty constitutes the final, complete and exclusive statement of warranty terms. No person or
organization is authorized to make any other specific or implied warranties or representations on behalf of Aqua Creek.

THE WARRANTIES SET FORTH HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
WHICH ARE HEREBY DISCLAIMED AND EXCLUDED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE.

THE SOLE AND EXCLUSIVE REMEDIES FOR BREACH OF ANY AND ALL WARRANTIES WITH RESPECT TO THE
PRODUCTS SHALL BE LIMITED TO REPAIR OR REPLACEMENT AT AQUA CREEK’S DESIGNATED FACTORY
LOCATION, OR DULY APPOINTED DISTRIBUTOR, OR IN PLACE AT AQUA CREEK’S OPTION. IN NO EVENT
SHALL AQUA CREEK’S LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO AQUA CREEK BY THE ORIGINAL
PURCHASER FOR THE FAILED OR DEFECTIVE PRODUCT.

IN NO EVENT SHALL AQUA CREEK PRODUCTS, LLC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,
SPECIAL, INDIRECT, PUNITIVE OR EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS
LIMITED WARRANTY OR OTHERWISE.

Aqua Creek Products

9889 Garry More Lane

Missoula, MT 59808

Accessible Environments, Inc.

Authorized National Dealer

For orders/questions, call:

(800) 643-5906

www.acessinc.com

Содержание PRO SPA 60


















Отзывы:

Нет отзывов