Copyright © 2019 Aqua Creek Products All Rights Reserved
Revised 6/17/19
The Aqua Creek legrest assembly is designed to fi t under the chair and is installed inside the 2”
square tubing that supports the chair from underneath. To install the legrest;
1. Insert the legrest assembly into the 2 x 2 square tubing that supports the chair until the plastic
insert of the legrest assembly sits fl ush against the end of the 2 x 2 tube.
2. Using the supplied 1/4” hardware, fasten the legrest assembly to the 2 x 2 tubing using a 5/32”
allen wrench.
Installation Instructions
1/4" FLAT WASHER
1/4" LOCK WASHER
1/4" X 1/2" BUTTON-HEAD
LEGREST ASSEMBLY
LEGREST IN
LEGREST OUT
9
