Aqila Securehub, Руководство пользователя

Страница: 23 / 40

23
www.getaqila.com
SENSOR
MANAGEMENT
In the Aqila Smart App, go to Aqila Securehub™ and select “Sensors”, inside the
“Sensor” menu there is a list of all sensors and remote controls that are connected
to Aqila Securehub™, you can turn on/ off the sensor, add/ remove sensors, set zone
names, as well as view battery level of each sensor. It is highly recommended to set a
name zone to identify the precise location whenever alarm occurred.
Or the second way is via Aqila Smart App. Go into Aqila Securehub™ and select
“Sensors”, then select sensor or “remote control” then select “Add” and follow the
instructions. Then press “x” to exit connection mode.
The sensors included in
the Aqila Home Security
Kit is has been connected
to Aqila Securehub™.
But for additional
sensors, it can be done
in 2 ways. The first way is
just as described in this
step-by step picture.
• Aqila Securehub™ beep once and the LED indicator
flashes once, it means the connection process has
been successful.
• If Aqila Securehub™ beeps 2 times and LED
indicator flashes once, it means that the sensor has
previously connected.
• When Aqila Securehub™ beeps 3 times and LED
indicator flashes once, it means the connection
capacity to Aqila Securehub™ is full (up to 50
sensors). (Note! Please do not use tamper switch
to register. Also do not perform connection battery
level is low).
Press the
connection
button on
the Aqila
Securehub™
For remote
control, press
any button on
remote control
For door/window
sensor, separate
the sensor
transmitter and
sensor magnet
part
For motion
sensor, press
the black
button behind
the motion
Connecting Sensor to
Aqila Securehub™