Ceiling mounted air filtration units
7
8.2 Location
1.
The location selected to install the unit must be able to support it’s weight and the optional
equipment. Dust weight contained in drawers must also be accounted for. This is an MAXITOP
is an industrial dust collector and is equipped with a medium pressure blower. Noise is
generated at some 90dba and more when pulsing. Location should be determined bearing
workers position in the vecenity.
2.
Install the dust collector in a manner to have access to the control panel, valves, fan, dust
drawers and cartridges access doors.
3.
A proper lifting device such has a lift or crane may be required for the installation of the unit.
4.
For safety purposes, a minimum two (2) man crew should be assigned to install the dust
collector.
5 .
A lifting device such as fork lift or scissor lift will be required to install the dust collector.
8.3 Installation
Unit may be installed in following manners:
Note:
it is recommended to use industrial grade fasteners to attach the unit to the sup-port
structure.
1 .
Usure the bottom of the collector is at a safe height to prevent accidents with workers or
equipment.
2 .
Flush ceiling mount, by means of anchor bolts and vibration pads. (Figure 1)
3 .
Ceiling support structure. Suspended from from joices or support structure by means of angle
iron braces or steel tubes and vibration pads. (Figure 2)
figure 1
Figure 1
Figure 2
8
2
3
7
1
NUT
NUT
