AQC MAXIFLO-VC, Руководство пользователя

Страница: 28 / 29

AQC Dust Collecting Systems
Problem Probable cause Solution
Cleaning cycle light is
ON but nothing happens. Defective sequencer card Check if sequencer card is defective by
following the manufacturer’s
recommendations.
The alarm light is ON
(DCT-1000) Alarmvalue is too low
Adjust to a higher value
Too much pressure loss Check and clean compressed air system.
Replace cartridges if normal pressure
does not resume to normal
The pneumatic data hose is
unplugged, broken or
clogged. Check the pneumatic hoses connected to
the DCP pressure module for any leak or
tear. Replace if necessary.
28