APW Wyott HHP-212, Инструкция по установке и эксплуатации

Страница: 2 / 17

TABLE OF CONTENTS:
2
LOCATION OF DATA PLATE
The data plate for the gas open burner range is located on the right side panel.
IMMEDIATELY INSPECT FOR SHIPPING DAMAGE
All containers should be examined for damage before and during unloading. The freight carrier has
assumed responsibility for its safe transit and delivery. If equipment is received damaged, either apparent or
concealed, a claim must be made with the delivering carrier.
A) Apparent damage or loss must be noted on the freight bill at the time of delivery. It must then be signed by
the carrier representative (Driver). If this is not done, the carrier may refuse the claim. The carrier can supply
the necessary forms.
B) Concealed damage or loss if not apparent until after equipment is uncrated, a request for inspection
must be made to the carrier within 15 days. The carrier should arrange an inspection. Be certain to hold all
contents and packaging material.
Installation and start-up should be performed by a qualified installer who thoroughly read, understands and
follows these instruction.
If you have questions concerning the installation, operation, maintenance or service of this product, write
Technical Service Department APW Wyott Foodservice Equipment Company, 1938 Wyott Drive,
Cheyenne, WY 82007.
Before installing and operating this equipment be sure everyone involved in its operation is fully trained and
is aware of all precautions. Accidents and problems can result by a failure to follow fundamental rules and
precautions.
Shut off gas flow through the appliance before cleaning or servicing unit.
The following words and symbols, found in this manual, alert you to hazards to the operator, service
personnel or the equipment. The words are defined as follows.
1. SAFETY PRECAUTIONS
SECTION ITEM PAGE
1 Safety Precautions.......................................................................................................2
2 General Installation Instructions ..................................................................................4
3 Specifications...............................................................................................................4
4 Lighting Instructions.....................................................................................................7
5 Maintenance ................................................................................................................8
6 Conversion...................................................................................................................9
7 Replacement Parts Lists & Exploded View.................................................................11
8 Warranty .....................................................................................................................16