2M-Z24235 Owners Manual for Built-In Hot Food W
ell W
armers
7
OPERATION (continued)
AUTOFILL WARMERS continued
6. DO NOT use autofill warmers in the dry mode. This may damage the water
level sensor probe. NEVER turn the thermostat ON for the pan with the
probe and fill tube unless the entire warmer unit is to be used in the wet
mode.
7. Clean water level sensor daily to maintain water level in warmer.
OPERATION
1. Always use an inset.
DO NOT
place food directly into the warmer.
2. Check water level in wet-operation warmer frequently during use. Running
warmers dry will lower the temperature of the food in the insert pan, and may
damage the warmer.
3. Alternating between wet and dry operation in any individual warmer is
NOT
recommended.
4.
DO NOT
use metal tools, steel wool, or caustic or abrasive cleanser to clean
warmer pan.
WARMERS WITH MANIFOLDED DRAIN
1. Manifolded warmers have a single drain valve.
2. Water poured into any one section will seek the same water level with all
sections on the manifold.
3. Make sure the drain valve is fully closed before filling warmer.
