2
TABLE OF CONTENTS
ITEM PAGE
General Information . . . . . . . . . . . . . . . . . . . . . 2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . 3
Specifications & Dimensions . . . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Electrical Connections . . . . . . . . . . . . . . . . . . . 5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ITEM PAGE
Maintenance / Cleaning . . . . . . . . . . . . . . . . . 6
General Troubleshooting . . . . . . . . . . . . . . . . . 6
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . 7
Replacement Parts Lists . . . . . . . . . . . . . . . . . 7
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
GENERAL INFORMATION
This manual should be retained for future reference.
CAUTION: This equipment is not intended for self-service or open buffet use in
customer service area.
CAUTION: These models are designed, built, and sold for commercial use. If these
models are positioned so the general public can use the equipment, make sure that
cautions, warnings, and operating instructions are clearly posted near each unit so
that anyone using the equipment will use it correctly and not injure themselves or
harm the equipment.
WARNING: Check the data plate on this unit before installation. Connect the unit
only to the voltage and frequency listed on the data plate. Connect only to 1 or 3
phase as listed on the data plate.
WARNING: Improper installation, operation, service or maintenance can cause
property damage, injury or death. Read and understand these instructions thoroughly
before positioning, installing, maintaining or servicing this equipment.
WARNING: Electrical and grounding connections must comply with the applicable
portions of the national electrical code and/or other local electrical codes.
WARNING: Disconnect device from electrical power supply and place a Tag Out-
Lockout on the power plug, indicating that you are working on the circuit.
WARNING: Install per the spacing requirements listed in the installation section
of this manual. We strongly recommend having a competent professional install
the equipment. A licensed electrician should make the electrical connections and
connect power to the unit. Local codes should always be used when connecting
these units to electrical power. In the absence of local codes, use the latest version
of the National Electrical Code.
NOTICE: Maintenance and repair should be handled by a factory authorized agent.
Before doing any maintenance or repair, contact APW Wyott
