Page 16
Original operating manual LF 600 M1
APV – Technische Produkte GmbH
Maintenance and repairs
Danger
Where and in which situations
does the danger occur?
Countermeasure
Incorrectly or
inadequately performed
maintenance work with
limited visibility
Under poor light conditions
If necessary, maintenance must be
performed with additional lighting.
4 Installation and commissioning
Overview
In this section, you will learn which work steps must be performed for the installation and commissioning
of the Liquid Fertilizer and what must be done and observed.
4.1
Attaching the Liquid Fertilizer implement to a tractor
Purpose
For field operation, the Liquid Fertilizer can be attached directly to the front of a tractor using
the 3-point hitch.
Requirements
The following requirement must be fulfilled for this work step:
The implement is disconnected from the power source, see
Disconnecting the Liquid Fertilizer
from the
power source on page 29 for more information.
Required components, tools and materials
For this work step, the following components, tools and materials are required:
•
Cat. 2 top link
•
Top link pin with linchpin
•
2x linchpin for the lower link attachment
Procedure for attachment
To attach the Liquid Fertilizer to a tractor:
Step
Description
Explanation/illustration
1
Drive the tractor towards the implement.
2
Connect the two lower links to the LF 600 M1.
3
Adjust the Cat. 2 top link to the right length and couple onto
the implement using the top link pin.
During operation, the LF should
be aligned vertically to achieve
optimal emptying.
4.2
Installing nozzles on the soil tillage implement
Purpose
The nozzles are used to spread the liquid fertilizer in the right position on the soil tillage implement or
seed drill.
