-3-
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be
followed, including the following:
1. Read and understand all instructions before using.
2. Close supervision is necessary when any fixture is used by or near
children. Do not leave the fixture unattended while in use.
3. Care must be taken as burns can occur from touching hot surfaces.
4. Do not operate the fixture if a cord is damaged, or if the fixture has
been dropped or damaged, until it has been examined by qualified
service personnel.
5. Position any power cables such that they will not be tripped over,
pulled, or put into contact with hot surfaces.
6. If an extension cord is necessary, a cord with an amperage rating
at least equal to that of the fixture should be used. Cords rated for
less amperage than the fixture may overheat.
7. Always unplug the lighting fixture from the electrical outlet before
cleaning and servicing, or when not in use. Never yank the cord to
remove the plug from the outlet.
8. Let the lighting fixture cool completely before storing. Unplug the
power cable from lighting fixture before storing and store the cable
at assigned space of the carrying case.
9. To reduce the risk of electric shock, do not immerse this fixture in
water or any other liquids.
10. To reduce the risk of fire or electric shock, do not disassemble this
fixture. Contact [email protected] or take the lighting fixture to
qualified service personnel when service or repair is required.
Incorrect reassembly may cause electric shock when the lighting
fixture is in use.
11. The use of any accessory attachment not recommended by the
manufacturer may increase the risk of fire, electric shock, or injury to
any persons operating the fixture.
12. Please power this fixture by connecting it to a grounded outlet.
13. Please remove the protective cover before use.
14. Please remove the protection cover before using the reflector.
15. Please do not block the ventilation or do not
look at the LED light source directly when it is
powered on. Please do not touch the LED light
source in any condition.
16. Please do not place the LED lighting fixture near any flammable
object.
17. Only use a dry microfiber cloth to clean the product.
18. Please do not use the light fixture in wet condition on account of
electric shock may be caused.
19. Please have the product checked by an authorized service
personnel agent if the product has a problem. Any malfunctions
caused by unauthorized disassembly are not covered by the
warranty. The user may pay for maintenance.
20. We recommend only using the original Aputure cable
accessories. Please note that any malfunctions caused by using
unauthorized accessories are not covered by the warranty. The user
may pay for maintenance.
21. This product is certified by RoHS, CE, KC, PSE, and FCC. Please
operate the product in full compliance with relevant country's
standards. Any malfunctions caused by incorrect use are not covered
by warranty. The user may pay for maintenance.
22. The instructions and information in this manual are based on
thorough, controlled company testing procedures. Further notice
will not be given if the design or specifications change.
SAVE THESE INSTRUCTIONS
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a different circuit than the receiver is
connected to.
Consult the dealer or an experienced radio/TV technician for help.
This device has been evaluated to meet general RF exposure requirements.
RF Warning Statement:
Содержание Light Storm Series
Страница 1: ...LS 1200d Pro Product Manual English...