Aputure Light Storm Series, Руководство по эксплуатации продукта, Страница: 11 / 25

-10-
-
+
Press the MENU Button to enter the menu interface, rotate the Select wheel and short
press to enter the DMX mode.
DMX address: LS 1200d Pro will set to in DMX Address interface.
DMX Loss Behavior: Use the Select button to select Black out /fade to Black /Hold last
setting/ Hold 2 min& fade Out.
① Black out -when the DMX signal is lost, it will be Black out.
②
Fade to Black -after DMX signal is lost, it will fade to Black in 60 seconds.
③ Hold last setting -After DMX signal is lost, remember the last control setting.
④ Hold 2 min& Fade Out -After the DMX signal is lost, keep the last control setting for
two minutes, and then Fade to Black within 60 seconds.
DMX Profile: Rotate the Select wheel , and short press to select Lighting / Effect
/Lighting& Effects 8-bit or 16-bit.
DMX Termination: toggle Auto-termination on or off.
1) Rotate the Select Wheel to adjust the intensity of the light from 0-100% in 0.1%
increments. The speed with which you turn the knob will change the rate of increase
or decrease.
2) Press the MENU button to enter the Menu Interface. In the Menu Interface, you will
find DMX Mode, Lead-follow Mode, Dimming Curve, Fan Mode, Studio Mode,
Frequency Selection, Control System, Language, Factory Reset, Update, Product
Information, Custom FX.
2. Control
2.1) DMX Mode
DMX Mode
MENU