APURO GF454-A, Инструкция по эксплуатации

Страница: 3 / 8

Telephone Helpline: 1300 225960
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance
and operation of this machine will provide the best possible performance from your
APURO product.
Pack Contents
The following is included:
• Pie Warmer • Wire rack x 3
• Sliding glass door x 2 • Element Guard
• Glass display panel • Water Reservoir
APURO prides itself on quality and service, ensuring that at the time of packaging the
contents are supplied fully functional and free of damage. Should you find any damage as a
result of transit, please contact your APURO dealer immediately
.
Installation
To install the Pie Warmer:
1. Remove the Pie Warmer from the packaging. Make sure that all protective plastic film and
coatings are thoroughly removed from its surfaces.
2. Take the glass display panel and raise it at an angle into the upper track at the rear of the unit
[Fig. 1] .
3. Once at the top of the track, position the bottom of the glass above the lower track [Fig. 2] .
4. Carefully lower the glass into the bottom track [Fig. 3] .