Installation Manual
High Efficiency Bifacial Half-Cell Module
www.aptossolar.com | [email protected]
All Rights Reserved. DNA-120/144 Installation Manual Rev 0.0
Page 6
Jbox information
Overcurrent protection type: none
# of bypass diodes: 3
Diameter of cables: every modules have 2 cables whose
diameter is 4mm
2
for any one of them, and it can
endure 90
o
C insulation and can be exposed under sun
light.
Ways of connecting
Every modules with 2 connectors that are positive
electrode and negative electrode. When modules are
installed in series, the first positive connector should
connect with the negative connector of the next
module.
The modules are equipped with PV wiring connectors
that comply with the Standard for Connectors for use in
photovoltaic systems, UL 6703, the specific allowable
mating connector manufacturer and model number are
listed as below.
