APT VEYRON IV 3.2KW, Руководство пользователя

Страница: 30 / 67

28
Error message for USB On-the-Go functions:
Error Code Messages
No USB disk is detected.
USB disk is protected from copy.
Document inside the USB disk with wrong format.
If any error occurs, error code will only show 3 seconds. After 3 seconds, it will automatically return to
display screen.
2.
Timer Setting for Output Source Priority
This timer setting is to set up the output source priority per day.
Procedure LCD Screen
Step 3: Press “ ”, “ ” or “ ” button to enter the selectable programs (detail
descriptions in Step 3).
Step 4: Please select setting program by following each procedure.
Program# Operation Procedure LCD Screen
Press “ ” button to set up Utility First Timer. Press “ ” button
to select staring time. Press “ ” or “ ” button to adjust values
and press “ ” to confirm. Press “ ” button to select end time.
Press “ ” or “ ” button to adjust values, press “ ” button to
confirm. The setting values are from 00 to 23, with 1-hour
increment.
Press “ ” button to set up Solar First Timer. Press “ ” button
to select staring time. Press “ ” or “ ” button to adjust values
and press “ ” to confirm. Press “ ” button to select end time.
Press “ ” or “ ” button to adjust values, press “ ” button to
confirm. The setting values are from 00 to 23, with 1-hour
increment.
Press “ ” button to set up SBU Priority Timer. Press “ ” button
to select staring time. Press “ ” or “ ” button to adjust values
and press “ ” to confirm. Press “ ” button to select end time.
Press “ ” or “ ” button to adjust values, press “ ” button to
confirm. The setting values are from 00 to 23, with 1-hour
increment.
Press “ ” button to exit the Setup Mode.