4. Turn the start switch (D) to ON.
5. Pull out the starter rope until it resists. Release
the handle so the starter rope goes back again,
and then pull the starter rope until the engine
starts.
6. Move the choke valve (F) gradually to the fully
open position.
7. Allow the engine to idle a few minutes before
increasing to full power (G).
G
Stopping the engine, Honda
1. Move the throttle control to idling position (A).
Let the engine idle for a few minutes.
A
2. Turn the start switch (B) to OFF.
B
3. Close the fuel cock (C).
C
Operating
DANGER Handle hazard
When changing the locking position, the handle must
be held, otherwise it can cause injuries.
►
Hold the handle.
►
Lower the handle with caution.
17
© 2014 Construction Tools EOOD | No. 9800 1624 01 | 2014-06-19
Original instructions
Safety and operating instructions
RP 160