APT RP 160 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 32

APT RP 160 Скачать руководство пользователя страница 13

Use ear protectors label

Transport

Lifting the machine

WARNING Lifting hazard

Never lift the machine without checking if it is intact.
A damaged machine can fall apart, which can result
in serious injury.

►

Check that all equipment are dimensioned in
accordance with applicable regulations.

►

Never tow the machine.

►

Never walk or stand under a lifted machine.

►

Only lift the machine by a hook on the frame.

►

Check that the shock absorbers and safety frame
are correctly attached and not damaged.

►

Check that the safety straps are not damaged,
change if necessary.

►

Check the machine's data plate for weight
information.

Lifting the machine

♦

Before lifting the machine check that the shock
absorbers (A) and safety frame lifting point (B) are
correctly attached and not damaged.

♦

Only use the safety frame lifting point (B) for lifting
the machine.

B

A

Secure transport

WARNING Transport hazard

During transportation always strap the machine
securely, otherwise it can cause injury.

►

Place lashing straps in a U-shape around the
bottom plate and secure both front and rear.

►

Lock the handle

Secure transport

Secure the machine for all transportation.

13

© 2014 Construction Tools EOOD | No. 9800 1624 01 | 2014-06-19
Original instructions

Safety and operating instructions

RP 160

«
...
11
12
13
14
15
...
»

Содержание RP 160

































Отзывы:

Нет отзывов