APS YC500A-MIW Installation/User Manual
1
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS! This manual contains important
instructions to follow during installation and maintenance of the APS
Photovoltaic Grid-connected Inverter (Microinverter). To reduce the
risk of electrical shock and ensure the safe installation and operation
of the APS Microinverter, the following symbols appear throughout
this document to indicate dangerous conditions and important safety
instructions.
WARNING:
This indicates a situation where failure to follow
instructions may cause a serious hardware failure or personnel danger
if not applied appropriately. Use extreme caution when performing
this task.
NOTE:
This indicates information that is important for optimized
Microinverter operation. Follow these instructions closely.
SAFETY INSTRUCTIONS
✔
Do NOT disconnect the PV module from the APS
Microinverter without first disconnecting the AC power.
✔
Only qualified professionals should install and/or replace APS
Microinverters.
✔
Perform all electrical installations in accordance with local
electrical codes.
✔
Before installing or using the APS Microinverter, please read all
instructions and cautionary markings in the technical documents
and on the APS Microinverter system and the PV-array.
✔
Be aware that the body of the APS Microinverter is the heat sink
and can reach high temperatures. To reduce risk of burns, do not
touch the body of the Microinverter.
✔
Do NOT attempt to repair the APS Microinverter.
If it fails, contact
APS Customer Support (206-855-5100) to obtain an RMA number
and start the replacement process. Damaging or opening the APS
Microinverter will void the warranty.
1
WARNING
SYMBOL
NOTE
SYMBOL