ALTENERGY POWER SYSTEM, INC.
4
1.
Important safety information
This manual contains important instructions to follow during installation and maintenance of
the APS Photovoltaic Grid-connected Micro-inverter. To reduce the risk of electrical shock
and ensure the safe installation and operation of the APS Micro-inverter, the following
symbols appear throughout this document to indicate dangerous conditions and important
safety instructions.
WARNING:
This indicates a situation where failure to follow instructions
may cause a serious hardware failure or personnel danger if not applied
appropriately. Use extreme caution when performing this task.
NOTE:
This indicates information that is important for optimized
Micro-inverter operation. Follow these instructions closely.
Symbols replace words on the equipment, on a display, or in manuals.
Trademark
Caution, risk of electric shock
Caution, hot surface
Symbol for the marking of electrical and electronics devices according
to Directive 2002/96/EC. Indicates that the device, accessories and the
packaging must not be disposed as unsorted municipal waste and must
be collected separately at the end of the usage. Please follow Local
Ordinances or Regulations for disposal or contact an authorized
representative of the manufacturer for information concerning the
decommissioning of equipment.
CE mark is attached to the solar inverter to verify that the unit follows
the provisions of the European Low Voltage and EMC Directives
Refer to the operating instructions
