-5-
VI.
OPERATION USING COMPUTER CONTROL
A. The microprocessor based controller display has the following capabilities:
1. 12 automatic programs (menus) of parameter setting storage.
2. Program 00 is manual operation mode.
3. You can set all machine parameters in the EDIT mode.
4. The machine will operate in the RUN mode
Blow-off time
Wave height (%)
Wave time (sec.)
Wave count-down
Standby wave height
Fig. 5
260 10 95 1.0 01
260 10 65 ON RUN
Program #
Set point
temp °C
Actual temp
Run/Edit mode
Blow-off
count-
down
Emergency stop
Insert
position
Air nozzle
position switch
(option)
Remove
position
Same as E-stop -press any key to reset
Fig. 4
260 10 95 1.0 01
260 10 65 ON RUN
Enter key
Increment key
Cursor key
Function key
