background image

2

APROLI

  

280/700 

STRONG

INSTRUCTIONS FOR THE INSTALLATION OF THE APROLI 280/700 STRONG SWING
GATE OPERATOR

PIC. 1

FOR CORRECT APROLI 280/700 STRONG INSTALLATION AND GOOD PERFORMANCE, PLEASE READ THE INSTRUCTIONS OUTLINED
IN THIS MANUAL CAREFULLY AND KEEP TO THE DIAGRAMS.
IMPORTANT: THE ENTIRE INSTALLATION MUST BE CARRIED OUT BY QUALIFIED TECHNICAL PERSONNEL, WHO ARE ADVISED TO
FOLLOW GOOD INSTALLATION PRACTICE AND KEEP TO CURRENT SAFETY STANDARDS.

GENERAL INFORMATION

- Check that the structure of the gate to be automated is suitable for the application to be installed: make sure that there are no anomalies

in the metal structure, reinforce any weak points and ensure that the leaf hinges are in perfect condition.

- If necessary, reinforce the connection point between the leaf and the bended arm fixing shoe
- The gate’s movement should not be obstructed in any way: excessive rises in the ground, friction in the hinges, ...
- The gate leaves must be installed and levelled on a flat surface

The Aproli 280/700 Strong is an external oil-hydraulic gate operator for swing gates, with two-directional hydraulic locking, suitable
for gates with very large pillars and for heavy gates. It meets all the most demanding installation requirements thanks to the use of a
bended steel arm and “telescopic” end section for leaf fixing.
We recommend using the Aproli 280/700 Strong for leaves of no more than 3.0 metres long and weighing more than 300 kg.

IMPORTANT:

- The Aproli 280/700 Strong should only be installed on gates with leaves up to 3.0 metres long
- An electric lock must always be installed for leaves of over 2.0 metres long.
It is advisable to fasten all the open and closed gate stops firmly to the ground, and to check how sturdy they are during the initial gate
operation tests. (Pic.1)

GATE STOP IN OPEN
GATE POSITION

PLAN OF GATE WITH TWO APROLI 280/700 STRONG INSTALLED

GATE STOP IN
CLOSED GATE
POSITION

CLOSED LEAF

CLOSED LEAF

PILLAR

PILLAR

LEFT BENDED ARM

RIGHT BENDED ARM

LEAF FIXING  SHOE

LEFT-HAND
APROLI 280/700
STRONG

RIGHT-HAND
APROLI 280/700
STRONG

OPEN LEAF

OPEN LEAF

Содержание 280/700 STRONG













Отзывы: