-19-
R251
SWING GATES
3.
INSTALLATION
3.1
Rear connection fastening
•
The connection plate can be welded to the pillar or fastened to the masonry wall using M8 screws (example in Fig.10).
WARNING: If the wall is not sufficiently resistant or if it is made of hollow bricks, we recommend using chemical bolts for
M8 screw
(
refer to the instructions provided with the purchased bolts).
3.2 Operator installation on rear connection
•
Fasten the operator to the connection using
the pin and the dowel supplied (see Fig.10).
!
Warning
Handle the operator with care during assembly and disassembly from the relevant seats, to avoid accidents to
those who handle it or to any persons in the vicinity.
Fig.10
E
n
g
li
s
h
