APRILIA Tuono V4 1100 Factory 2021, Руководство пользователя

Страница: 191 / 242

Crankcase
C
RANKCASE
pos. Description Type Quantity Torque Notes
1 Stud bolts M10 18 20 Nm (14.75 lb ft) Loct. 270
2 TE Flanged screw M8x70 4 25 Nm (18.44 lb ft) Lubricate the head
and under the head.
3 TE Flanged screw M6x50 8 10 Nm (7.38 lb ft) Lubricate the head
and under the head.
4 TE Flanged screw M8x35 1 25 Nm (18.44 lb ft) Lubricate the head
and under the head.
5 TE Flanged screw M8x50 3 25 Nm (18.44 lb ft) Lubricate the head
and under the head.
6 Gearbox control rod support SHC fix-
ing screws
M6x35 2 10 Nm (7.38 lb ft) Lubricate the head
and under the head.
7 Flanged TE screw fixing fuel rail
gearbox lubrication
M6x12 2 10 Nm (7.38 lb ft) Pre-impregnated
screw and in ab-
sence Loct.2045
8 TB TORX fixing screw of the con-
necting rods lubrication nozzles
4x12 4 5 Nm (3.69 lb ft) Pre-impregnated
screw, in absence
Loct.2045
9 TSPEI screw fixing bearing stop
plates
M6x16 2 10 Nm (7.38 lb ft) Loct. 243
10 Stud bolt M6 1 Bring to 33mm from the
surface
Loct. 648
11 SHC screw M6x40 1 10 Nm (7.38 lb ft) Lubricate the head
and under the head.
12 Special nut - 1 10 Nm (7.38 lb ft) -
13 Flanged nut M10 6 15 + 20 Nm (11.06 +
14.75 lb ft) + 60° + 60°
Lubricate the head
and under the head.
Use the sequence:
1) Pre-tighten to 15
Nm (11.06 lb ft); 2)
Tighten to 20 Nm
(14.75 lb ft); 3)
Tighten applying an
angle of 60° +/- 2; 4)
Repeat the opera-
Tuono V4 1100 Factory
Engine
ENG - 191