![APRILIA SCARABEO 50 I.E 100 4T - 2002 Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/aprilia/scarabeo-50-i-e-100-4t-2002/scarabeo-50-i-e-100-4t-2002_manual_2956548023.webp)
23
use and maintenance
Sonic 50
FRONT BRAKE DISC
The brakes are the parts that
most ensure your safety and for
this reason they must always be
perfectly working.
The brake fluid must be changed once a
year by an
aprilia
Official Dealer.
This vehicle is provided with front hydraulic
disc brake.
When the disc pads wear out, the level of
the fluid decreases to automatically com-
pensate for their wear.
The brake fluid reservoir (1) is positioned
near the front brake lever coupling. Period-
ically check the brake fluid level in the res-
ervoir (1) and the pad wear, see p. 45
(CHECKING THE BRAKE PAD WEAR).
CHECKING
To check the brake fluid level, proceed as
follows:
◆
Position the vehicle on the centre stand.
◆
Rotate the handlebar leftwards, so that
the fluid contained in the reservoir is par-
allel to the
≈
MIN
∆
mark stamped on the
glass (2).
◆
Make sure that the level of the brake fluid
contained in the tank exceeds the
≈
MIN
∆
mark stamped on the glass (2).
◆
If not, provide for topping up.
TOPPING UP
Carefully read p. 22 (BRAKE FLUID -
recommendations).
The brake fluid may flow out of
the reservoir. Do not operate the
brake lever if the screws (3) are
loose or, most important, if the brake
fluid tank cover has been removed.
◆
Unscrew the two screws (3).
◆
Remove the cover (4).
◆
Remove the guide cover (5).
In order not to spill the brake fluid
while topping up, keep the fluid in
the reservoir parallel to the reser-
voir rim.
◆
Remove the gasket (6).
In order to reach the
≈
MAX
∆
level,
top up until covering the glass
(2) completely, with the brake fluid res-
ervoir rim parallel to the ground.
The topping up to the
≈
MAX
∆
lev-
el can be carried out only with
new pads.
The fluid level decreases progressively
with the pad wear.
Do not top up to the
≈
MAX
∆
level with
worn pads, since this may cause an out-
flow of liquid when the brake pads are
changed.
◆
Fill the tank with brake fluid, see p. 71
(LUBRICANT CHART), until it covers the
glass completely.
◆
Put back the gasket (6) in its seat cor-
rectly.
◆
Put back the guide cover (5) correctly.
◆
Put back the cover (4).
◆
Screw and tighten the two screws (3).
Содержание SCARABEO 50 I.E 100 4T - 2002
