APRILIA RS 50 TUONO, Инструкция по эксплуатации и обслуживанию

Страница: 31 / 88

31
use and maintenance
RS 50 Tuono
INSTRUCTIONS FOR USE
WARNING
Before departure, always carry out a
preliminary checking of the vehicle to
make sure that it functions correctly
and safely, see the following table
( P R E L I M I N A R Y C H E C K I N G
OPERATIONS). The non-performance of
these checking operations can cause
severe personal injuries or damages to
the vehicle.
Do not hesitate to consult your
aprilia
O f f i c i a l D e a l e r i n c a s e t h e r e i s
something you do not understand
about the functioning of some controls
or in case you suspect or discover
some irregularities.
It does not take long to carry out a
check-up and this operation ensures
you much more safety.
PRELIMINARY CHECKING OPERATIONS
Component Check Page
Front and rear disc
brakes Check the functioning, the idle stroke of the control
levers, the fluid level and make sure there are no leaks.
Check the wear of the pads. If necessary, top up the
brake fluid tank.
23, 24
25, 57
Accelerator Make sure that it works smoothly and that it is possible
to open and close it completely, in all steering
positions. If necessary, adjust and/or lubricate it.
58
2 stroke oil/
transmission oil
Check and/or top up if necessary.
26, 44, 45
Wheel/tyres Check the tyre surface, the inflation pressure, wear
and tear and any damage.
30
Brake levers Make sure that they work smoothly. If necessary,
lubricate the articulations and adjust the stroke.
27
Steering Make sure that the steering rotates smoothly, without
any clearance or slackening.
√
Clutch The idle stroke at the end of the clutch lever must be
about 10…15 mm; the clutch must operate without
jerking and/or slipping.
28
Side stand Make sure that it works smoothly and that the spring
tension brings it back to its normal position.
If necessary, lubricate joints and hinges.
65
Fastening elements Make sure that the fastening elements are not loose.
If necessary, adjust or tighten them.
√
Drive chain Check the slack.
50, 51
Fuel tank Check the fuel level and top up, if necessary. Make
sure there are no leaks or air bubbles in the circuit.
22, 53, 70
Coolant With cold engine, visually check if the coolant reaches
the prescribed level.
28, 29
Lights, warning lights,
horn and electric
devices Check the proper functioning of the acoustic and visual
devices.
Change the bulbs or intervene in case of failure.
60…63,
65…69