APRILIA RALLY 50 Скачать руководство пользователя

Страница: 71 / 104

use and maintenance

Rally 50

2%-/6).'

4(% %8(!534 3),%.#%2

Carefully read p. 53 (MAINTENANCE).

◆

Place the vehicle on the center stand.

WARNING

Ensure that the vehicle is stable.
It may cause damage to bystanders and
other property, as well as being dam-
aged itself.

WARNING

Before carring out the following opera-
tions, let the engine and the exhaust si-
lencer cool down until they reach room
temperature, in order to avoid burns.

◆

Unscrew and remove the screws (1) and
(2).

Screw (1) and (2) tightening torque:
7.23 ftlb (10 Nm).

◆

Unscrew and remove the two screws (3)
and (4) that fasten the exhaust silencer
to the engine.

Screw (3) and (4) tightening torque:
18.08 ftlb (25 Nm).

◆

Remove the exhaust silencer.

NOTE

Upon reassembly, replace the

gasket positioned between the exhaust
manifold and the silencer with a new one.

Содержание RALLY 50









































































































Результаты поиска

Содержание RALLY 50

Отзывы:

Похожие инструкции для RALLY 50

Бренды по названию

Популярные бренды

APRILIA RALLY 50, Руководство пользователя

Результаты поиска

Содержание RALLY 50

Отзывы:

Похожие инструкции для RALLY 50

Бренды по названию

Популярные бренды