APRILIA RALLY 50 Скачать руководство пользователя | Manualshive

Страница: 23 / 104

background image

23

use and maintenance

Rally 50

-

Always  observe  posted  and  statutory
speed limits, but do  not assume that you
can ride as fast  as  the speed  limit under
all road conditions.  Slowing down a little
can greatly increase your safety under all
road conditions.

Do not ride your vehicle off road.

Do not tamper with the muffler system or
the emissions control system of your vehi-
cle. This is not only bad for the environ-
ment, it can subject you to serious penal-
ties.

#,/4().'

Before riding your vehicle, ensure that
your riding gear is in good condition. To
be effective, your helmet must fit properly,
and the visor or other eye protection must
be clean.

Bo th  r ese arc h  and   e xper ie nce  ha ve
shown that drivers of other vehicles often
do not see vehicles or riders.  In order to
make yourself more conspicuous to these
drivers,  wear  bright  reflective  clothing,
such as a reflective vest, or clothing  with
reflective  sections  sewn  into  the  jacket,
pants and gloves.  Be particular aware of
approaching  automobiles and trucks  that
might be trying to turn left in front of you.
Many vehicle accidents are caused by an
opposing automobile  driver making a left
turn without warning in front of the vehicle.

Inevitably, the driver will look right at you,
and yet swear that they did not see you
before they turned directly into your path.
Ride alert!

Wear protective clothing, preferably in light
and/or reflecting colours. In this way you
will make yourself more visible to the other
drivers, thus notably reducing the risk of
being knocked down, and you will be more
protected in case of fall.

Always wear your crash helmet. Many ac-
cidents are fatal because of injuries to the
head.

This clothing should be very tight-fitting
and fastened at the wrists and ankles.
Strings, belts and ties should not be hang-
ing loose; prevent these and other objects
from interfering with driving by getting en-
tangled with moving parts or driving mech-
anisms.

«
...
21
22
23
24
25
...
»

Содержание RALLY 50









































































































Отзывы:

Нет отзывов

Похожие инструкции для RALLY 50

SIDE FORCE 445cc

Бренд: Mash Страницы: 27

Бренд: Honda Страницы: 25

Бренд: R&G Страницы: 2

Бренд: kellermann Страницы: 7

Бренд: Yamaha Страницы: 338

Бренд: ICON Vehicle Dynamics Страницы: 4

Бренд: Shark Страницы: 76

Бренд: Mastech Страницы: 2

Бренд: Cagiva Страницы: 407

Бренд: Warn Страницы: 8

Бренд: Beta Страницы: 69

2009 RE 125 4T ENDURO

Бренд: Beta Страницы: 215

Бренд: Malaguti Страницы: 242

Бренд: hepco & becker Страницы: 2

Бренд: KTM Страницы: 7

Бренд: KTM Страницы: 12

Бренд: Scootworks Страницы: 2

Бренд: Honda Страницы: 137

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды