APRILIA ETX 125 Скачать руководство пользователя

Страница: 21 / 80

use and maintenance ETX 125

2 STROKE OIL TANK

Remember: 1 mile = 1.6 km
1 km = 0.625 miles

Top up the 2 stroke oil tank every 500 km.

The vehicle is provided with a separate
mixer that ensures the mixing of petrol
and oil for the engine lubrication, see p. 72
(LUBRICANT CHART).

The 2 stroke oil reserve is indicated by the
coming on of the 2 stroke oil reserve warn-
ing light “

” positioned on the dashboard,

see p. 15 (INSTRUMENTS AND INDICA-
TORS TABLE).

The use of the vehicle without 2
stroke oil seriously damages the
engine.

If you run out of oil in the 2 stroke oil
tank or if the 2 stroke oil pipe has been
removed, contact an

aprilia

Official

Dealer , who will provide for bleeding
the system.

This operation is indispensable, since
the running of the engine with air in the
2 stroke oil system may result in seri-
ous damage to the engine.

To introduce the 2 stroke oil in the tank,
proceed as follows:

◆

Remove the right side cover, see p. 40
(REMOVING THE SIDE COVERS).

◆

Remove the plug (1).

TANK CAPACITY: 1.4

TANK RESERVE: 0.5

Carefully wash your hands after
handling the oil.
Do not dispose of the 2 stroke oil

in the environment.

KEEP AWAY FROM CHILDREN

Содержание ETX 125

















































































Результаты поиска

Содержание ETX 125

Отзывы:

Похожие инструкции для ETX 125

Бренды по названию

Популярные бренды

APRILIA ETX 125, Руководство пользователя

Результаты поиска

Содержание ETX 125

Отзывы:

Похожие инструкции для ETX 125

Бренды по названию

Популярные бренды