APRILIA ETX 125 Скачать руководство пользователя

Страница: 40 / 80

use and maintenance ETX 125

IDENTIFICATION DATA

It is a good rule to write down the frame
and engine numbers in the space provided
in this manual.

The frame number can be used for the
purchase of spare parts.

Do not alter the identification
numbers if you do not want to in-

cur severe penal and administrative
sanctions. In particular, the alteration of
the frame number results in the immedi-
ate invalidity of the guarantee.

ENGINE NUMBER

The engine number (1) is stamped on the
right side of the engine casing base.

Engine no.

FRAME NUMBER

The frame number is stamped on the right
side of the steering column.

Frame no.

REMOVING THE SIDE COVERS

Carefully read p. 39 (MAINTENANCE).

◆

Position the vehicle on the stand.

The description of the following
operations refers to one side

cover, but it is valid for both.

◆

Rotate the quick fastening screw (3) anti-
clockwise by giving it 1/4 turn.

Proceed with care.
Do not damage the tangs and/or
their seats.

Handle the plastic components with
care and avoid scraping or damaging
them.

◆

Withdraw and remove the side cover (4).

Содержание ETX 125

















































































Результаты поиска

Содержание ETX 125

Отзывы:

Похожие инструкции для ETX 125

Бренды по названию

Популярные бренды

APRILIA ETX 125, Руководство пользователя

Результаты поиска

Содержание ETX 125

Отзывы:

Похожие инструкции для ETX 125

Бренды по названию

Популярные бренды