32
33
WI-FI MAINTENANCE AND TROUBlESHOOTING
Wi-Fi connection status
Radio status indicator
Message Center
Normal Operation .
Wi-Fi signal strength is indicated
by the appropriate number of bars.
No corresponding message
The thermostat Wi-Fi settings have not
been entered. Refer to the
Wi-Fi Quick
Start Guide
for instructions for entering
the Wi-Fi settings .
The frame is displayed and the bars cycle
from 0 to 4 .
Displays the SSID of the
thermostat .
Note:
The SSID
will be used to identify the
thermostat when using a
smart device to connect the
thermostat to your Wi-Fi router .
The thermostat cannot connect to the
Wi-Fi router . Verify that the router is
functioning properly .
The frame and all bars
flash on and off .
WiFi Connection Lost
The thermostat cannot connect to
the internet . Verify that your internet
connection is working .
The display will alternate between displaying the
frame and all bars.
Internet Connection Lost
There is an internal error with the
thermostat Wi-Fi radio . The thermostat will
continue to control the HVAC and indoor
air quality control equipment, but will not
be able to connect to Wi-Fi. contact an
HVAC professional for repair .
The frame will flash on and off .
Radio Error
Wi-Fi radio turned off . Refer to the Setup
Menu section for information about turning
the Wi-Fi module on .
Not displayed .
WiFi Turned Off
SETUP MENU
HOW TO ENTER THE SETUP MENU TO CHANGE SETTINGS
Press [MENU]
to enter the main menu .
Press [SETUP]
to enter the setup menu .
Press
or
to adjust the setting. (selected option
flashes .)
Press
[DONE]
to save and exit, Or
[CANCEl]
to exit
without saving .
The thermostat will discard changes and exit if nothing
is pressed within 60 seconds .
Press [Next]
or
[Back]
to page through the settings
(the setting is displayed in the message center) .
MESSAGE CENTER
(SCROLLING TEXT)
